Biamp Nexia PM
Start the console session.
Plug in ethernet cable with RS232 DB-9pin adaptors at both ends to console port of device from PC COM1 port
Open PuTTY and select "Serial" connection type, change baud rate (Speed) to 115200 and leave other settings as default.
Plug power into device and if a power button exists, turn it on.
Erase configuration.
Type the CLEAR 0 DEVCONFIG command:
*INFO:Welcome to the Nexia Text Protocol Server... *INFO:Running firmware 1.201-1.1-1.860 *INFO:IP Address: 10.5.124.151 *INFO:Subnet Mask: 255.255.252.0 *INFO:Default Gateway: 10.5.124.1 *INFO:Audio Started *INFO:READY. CLEAR 0 DEVCONFIG +OK
Type the RESET 0 FILESYSTEM command: RESET 0 FILESYSTEM +OK
Type the RESTART 0 DEVICE command:
RESTART 0 DEVICE *INFO:Welcome to the Nexia Text Protocol Server... *INFO:Running firmware 1.201-1.1-1.860
Copy all the output from the session into your records.
Right-click PuTTY's titlebar, from that dropdown menu click on "Copy All to Clipboard"
Open the file of record certifying the deconfiguration of this device and use CTRL V to paste all the output from PuTTY into that file. Formatting the text with a fixed-width font helps it look more readable.
End the session.
Turn off/unplug the device and close PuTTy.