Edge-Core Wedge100bf-65x-O-AC

NOTE: This guide is only useful if the default root password has not been changed.

  1. Start the console session.

    Plug in serial cable to console port of device from PC COM1 port
    Open PuTTY and select "Serial" connection type, change baud rate (Speed) to 115200 and leave other settings as default.
    Plug power into device and if a power button exists, turn it on.

  2. Reset the GRUB menu.

    Allow the boot process to complete, and for the bmc login / Password use root / 0penBmc then type the wedge_power.sh reset; sol.sh command:
    OpenBMC Release 01.11.00 bmc login: root Password: 0penBmc root@bmc:~# wedge_power.sh reset; sol.sh board type is Mavericks Power reset microserver ... Done You are in SOL session. Use ctrl-x to quit. ----------------------- SPD CRC Checking: Slave address:A0 Memory not present Slave address:A4 SPD CRC Pass
    Ensure the system reboots successfully.

  3. Erase configuration.

    Use the arrow keys to navigate to the GRUB menu item ONIE: Uninstall OS and press Enter:
    Welcome to GRUB! GNU GRUB version 2.02 +----------------------------------------------------------------------------+ | ONIE: Install OS | | ONIE: Rescue | |*ONIE: Uninstall OS | | ONIE: Update ONIE | | ONIE: Embed ONIE | | DIAG: Accton Diagnostic (accton_wedge100bf) | | | | | | | | | | | | | +----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. ONIE: OS Uninstall Mode ... Platform : x86_64-accton_wedge100bf_65x-r0 Version : 2018.05.00.09 Build Date: 2018-10-25T15:15+0800 Info: Mounting kernel filesystems... done. Info: Mounting ONIE-BOOT on /mnt/onie-boot ...
    Once this process completes configuration will be reset to factory default.
    discover: Uninstall mode detected. Running uninstaller. Uninstall complete. Rebooting... discover: Uninstall mode detected. No discover stopped. Stopping: dropbear ssh daemon... done. Stopping: telnetd... done. Stopping: klogd... done. Stopping: syslogd... done. Info: Unmounting kernel filesystems The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system reboot reboot: Restarting system

  4. Copy all the output from the session into your records.

    Right-click PuTTY's titlebar, from that dropdown menu click on "Copy All to Clipboard"
    Open the file of record certifying the deconfiguration of this device and use CTRL V to paste all the output from PuTTY into that file. Formatting the text with a fixed-width font helps it look more readable.

  5. End the session.

    Close PuTTy.