wePresent WIPG-1600

  1. Reset IP address and Admin password to default.

    Connect a VGA cable from the device to a monitor:
    Hold pinhole reset button on bottom down with a paperclip for 10+ seconds while plugging in power supply.
    Reset pinhole
    MirrorOp logo
    wePresent logo
    Check that the IP address shown in the display is 192.168.100.10:
    Display screen

  2. Erase Configuration

    Set PC network IP to the same subnet:
    IP settings
    Plug ethernet cable in to the device and enter 192.168.100.10 into browser on PC, accept the risk and continue:
    Browser warning
    Navigate to Admin, enter the default password of admin and tick the EULA box:
    Initial webpage
    Admin access
    Navigate to Reset to Default and click Apply button, then click OK button in the dialog to reboot:
    Factory Reset